The design features and working principle of the gas-wa […]
The design features and working principle of the gas-water mixing multi-head cooling atomizing nozzle in the mold factory:
1. The gas-water mixed multi-head cooling atomizing nozzle has a unique design, and its side is made up of 5 or 4 spray devices.
2, the specification uses 1/4 inch NPT or BSPT (inside) gas and liquid work under pressure, the resulting gas and water mixing, suitable for internal and external mixing.
3. The multi-head gas-water mixing atomizing nozzle is widely used for flue gas evaporative cooling, air humidification, etc. after cooling, due to the rational internal scientific design.
4, multi-head cooling atomizing nozzle can also produce the best spray effect in the environment where the pressure does not change. Each spray device consists of a liquid cap and a gas cap, and the spray pattern is: fan-shaped and round.
5, gas-water mixed multi-head cooling atomizing nozzles can be exchanged, and easy to disassemble, installation is also convenient for gas-water mixed multi-head cooling atomizing nozzle when the heat from the plastic and the temperature transferred to the surface of the cavity Affected by it, it is affected by the nature of the material, the temperature difference between the liquid and the surface of the abrasive, and the contact between the plastic and the abrasive material in the cooling. According to the study: cooling on an object in a certain industry can reduce the cooling time by about 20%.